Need some help for turbo piping...

[2kx2]

I am looking for someone that can supply or knows how to get oval tubing that is mandrel bent. I know that Dr. Gas can do it by bending it on the edge.

http://www.drgas.com/store/product.p...9&cat=8&page=1

I am wanting the tubing to be bent on the flat side. The discharge piping to the intake manifold would come out of the TB and bend at a 90 straight down. This piping would bend at a 90 again in the opposite direction at the bottom and connect to the intercooler.

Any suggestions and help is greatly appreciated.
Edit/Delete Message