Here's my project.Hammerhead. - Lateral-g Forums

Showme · #1 08-05-2007, 01:27 PM

Here's a few more.

Showme · #2 08-05-2007, 01:34 PM

This was the first design that I based the new look on.

This is the last front that I built,But it was not mean enough.It was built out of foam and glass.
(like a surfboard)

Showme · #3 12-31-2007, 01:19 PM

Here's a few updated pic's of it on the road in Eureka Springs Arkasas,at the Corvette weekend.(Put over 700mi on it that weekend)

Showme · #4 12-31-2007, 01:22 PM

Here it is on the move.

Showme · #5 12-31-2007, 01:25 PM

Hammer head still has alot of work and changes to do,but is comming along pretty well.I would like to finnish the body and put on some real paint soon!

tyoneal · #6 01-01-2008, 02:10 AM

Quote:

Originally Posted by Showme

Hammer head still has alot of work and changes to do,but is comming along pretty well.I would like to finnish the body and put on some real paint soon!

----------------------------------------------------------------------------
I bet it gets a Ton of Attention. How do the pipes sound? Are they true side mount headers? Do you have the baffles in them? Those are my favorite sounding exhaust. How much adjustment do you have in your front spoiler?

Do you have any performance numbers on it yet?

Too bad you can't post a link with just the sound of the pipes.

Thanks for posting the pictures.

Ty

Showme · #7 01-01-2008, 05:27 PM

The sides are real!(Hookers) They are almost open,they have resonators only to cutdown on the crack in the tone.(Homemade)I have a short clip of the car running that my daughter took.The front spoilers are very adjustable and made to swing back upon a strike.

This might give a good idea of it on the road.