5 Years Later - It's Not a "new" Project, And Not a New Member Anymore!!! - Lateral-g Forums

dodge · #1 04-16-2008, 06:17 PM

What is happening paint wise with the rear half of the chassis???Truck looks great so far

**syborg tt** · #2 04-16-2008, 08:30 PM

Quote:

Originally Posted by dodge

What is happening paint wise with the rear half of the chassis???Truck looks great so far

Right now were going for the rust frame look. Once the paint is complete - Kenny "Speed Racer" is going to blow it apart and detail put on the Level Pro and then drop it off at the powder coaters.

boonedog · #3 04-16-2008, 09:11 PM

lets see some more pics you tease

**syborg tt** · #4 04-16-2008, 10:28 PM

Yet Another Update.

The two tone has been layed out and now it's time to work on the tailgate.

It's a fairly large & flat surface so it needs to be broken up just a little.

Placement of the Graphics is key.

Soon you will see the finished product.

badmatt · #5 04-17-2008, 08:06 AM

WOW.........

mdprovee · #6 04-17-2008, 08:45 AM

What a great looking truck!!

**syborg tt** · #7 04-17-2008, 12:00 PM

Good Afternoon All,

So what does it look like outside in the Sunlight

I would say it Copper & Champaign, however Bob swears it's silver & red.

tony byram · #8 04-17-2008, 08:00 PM

The truck is looking GREAT, but Im curious, what kind of plans do you have for the second gen? Any ideas at this time? Power plant; trans;wheels and tire sizes;etc? Thats really got my attention,. Tony

**syborg tt** · #9 04-17-2008, 09:30 PM

Quote:

Originally Posted by tony byram

The truck is looking GREAT, but Im curious, what kind of plans do you have for the second gen? Any ideas at this time? Power plant; trans;wheels and tire sizes;etc? Thats really got my attention,. Tony

wow - lots of plans. The goal with the camaro is going to be make it a really nice driver.

LS3 w/ overdrive - paddle shift
tons of body mods
recovery room interior with OE style trim

bunch of DSE stuff
Full Air Ride Suspension

and it must have a back seat for the kids

**syborg tt** · #10 04-24-2008, 09:11 PM

Hi All,

It's all about the little details that no one may ever notice.

This is how the bed gap looks on a Stock s10 -- Not so good.

Sliding the bed forward you can solve the gap problem.
However, you will need to stiffen the chassis to prevent the bed from twisting and hitting the cab.

Of Course this then leads to the next problem.
The bed is just a little wider then the cab.

So off comes the bed.
Now it's time to drill out all of the spot welds that hold the bed sides on the truck

Just a close up of the fun that Dave had drilling spotwelds