1961 Healy build

[frankenstang]

With the AME kit, we lose the OEM front x-member right? It's 'self contained'? If so order the smaller one and it gives us a tad more room for wheel offset. Does the AME part have engine mounts? I don't think it does, we have to make some anyway.

[silver86]

Originally Posted by frankenstang

With the AME kit, we lose the OEM front x-member right? It's 'self contained'? If so order the smaller one and it gives us a tad more room for wheel offset. Does the AME part have engine mounts? I don't think it does, we have to make some anyway.

We will loose the front x, yes. No big deal, the original is actually even with the bottom of the frame, it doesn't hang below it. The KIT is just the x member and lower/uppers ect..Here is the kit 2nd one down http://artmorrison.com/layout.php?y=.../mifs/&x=index

We will still use the existing "boxes" for the engine mounts, that wont be a issue. We will just cut them down a few inches and weld a plate on it.
If we order the smaller one then we either need to notch the frame 1/2" on each side or we will need to add 1 " to the x member. I don't really think it will be that hard to notch it and box it, I just wanted to see what they suggest, they might even be able to make one for me.

I am almost positive I am going to get the AME kit though, seems to be the easiest way. They also come the closest in the track width we will need.