Project Splitter

[2ndgenracer]

No drop spindles. The adjustability with a coil over is nice, but rumor has it you have to be close. I think all of the weight up front contributes to being able to get away with the lowered stance, but the collar is close to center. Another reason to scale your car, make sure you get your cross weights close. If you look at the video of Splitter in the beginning, don't be fooled by the ride height. That was when I just got the suspension together. I had the collar only adjusted 1/4-3/8 up on the threads. Here is a shot of the car properly adjusted. It used to sit a little higher than this, but both front and rear have settled 3/8" from driving.