John's 68 "EFIN QIK" Camaro Project - Lateral-g Forums

John510 · #1 06-29-2008, 10:58 PM

I got the firewall done. It was made from a giant piece of sheetmetal. Also shaved my rear gas filler. Should have some paint on it next week or so.

**waynieZ** · #2 06-30-2008, 12:46 PM

Hi John The fire wall looks good and I like the way the valve covers came out. Keep the updates coming.
Wayne

**Spiffav8** · #3 06-30-2008, 01:23 PM

Nice work John! Looks like it's going to be a killer car!

My vote is to keep the drip rails.

John510 · #4 07-07-2008, 11:26 PM

I test fitted the motor the other day. It barely fits. About 1/2 inch to the firewall

http://www.flickr.com/photos/9938464@N03/2649148640/

http://www.flickr.com/photos/9938464@N03/2648318653/

youthpastor · #5 07-08-2008, 12:00 AM

looks good John- I just got my s&p plates in the mail today- keep us posted-Chris

John510 · #6 12-15-2008, 10:22 PM

Well I got frustrated and tried to sell my car for a while but then I realized I wasnt able to sell it and started working on it again. I finally got the motor to fit inside with the shaved firewall. Im using an ATS crossmember, S&P plates, Prothane mounts, and an Autokraft pan. Also started to test fit my chrome brake booster. The yellow stuff is masking tape on the booster. Next thing on my list is ordering a Prodigy Bar from Frank and Moser 12 bolt.

Mods can you please move this to project updates and let me know when you do? Thanks