1964 Chevelle what Vintage AC unit?

[PT Goat]

Originally Posted by lowpro71

...
Matt
You have givin me hope with your reply. I have talked to a couple shops here local and they cant give me the answer I am looking for. It seems they only do it 1 of 2 ways the surefit way or a smooth firewall with a 4 way bulkhead.

Do you have any pics? Also what unit are you using?

I'm using a Gen II supercooler kit with a 14x24 condenser. These pics are about 2yrs old, but right now they're all I've got. First pic shows the factory heater hose holes welded up and getting prepped with bondo. Pic 2 is looking through the blower motor hole to see the hole I cut in the kickpanel area. Pic 3 is the bulkead and plate that I fabbed. Last pic is kinda hard to see, but you get the idea how it turned out and how the lines will run under the fender.

[ProdigyCustoms]

Thanks Don, your commision check is in the mail

As Don mentioned, we do custom kits and are using the new Gen IV every chance we get. This Gen IV is just badd ass.

Call me if you need to discuss

four zero seven 832 1752