A little progress on my Chevelle - Lateral-g Forums

7TSS · #1 07-20-2008, 07:24 PM

Car is coming along nicely. Btw, does your cage weld to the frame or just to the floorpan? I read that for drag racing it needs to be welded to the frame on full frame cars. That is one reason I'm leaning away from doing a bar/cage.

Tom.A · #2 07-20-2008, 11:39 PM

Quote:

Originally Posted by 7TSS

Car is coming along nicely. Btw, does your cage weld to the frame or just to the floor pan? I read that for drag racing it needs to be welded to the frame on full frame cars. That is one reason I'm leaning away from doing a bar/cage.

Thanks. Yes it is welded to frame with about 7" of plate at each point where the frame is C sectioned. I have seen where some guy's have plated top and bottom of floor pan which I considered but since we welded it will have to be painted together. This car is going to be a beater anyway so will just mask the frame. How is your car? Is it back from paint and black?

Jr · #3 07-21-2008, 09:36 AM

Nice build.

7TSS · #4 07-21-2008, 06:59 PM

Quote:

Originally Posted by tom_a

Thanks. Yes it is welded to frame with about 7" of plate at each point where the frame is C sectioned. I have seen where some guy's have plated top and bottom of floor pan which I considered but since we welded it will have to be painted together. This car is going to be a beater anyway so will just mask the frame. How is your car? Is it back from paint and black?

I wish. Painter just recently came by to look at what needs to be done. Hopefully he'll start by the end of August. Been working on stripping it down again. Work is going slowly this time around. Seeing your car gives me inspiration though.

Tom.A · #5 07-31-2008, 12:06 AM

I got some time to hang the front sheet metal. It's along ways away, but for me it feels like progress after seeing parts laying around

Tom.A · #6 07-31-2008, 12:07 AM

Jr · #7 07-31-2008, 10:16 AM

That looks good. Is this your brothers shop?

Tom.A · #8 07-31-2008, 01:13 PM

Quote:

Originally Posted by DJW32

That looks good. Is this your brothers shop?

Thanks, The cage work was done by a company called Top of the line Fab.The pictures above are at my brother's shop..but he does not own it. He is employed by a Family that owns about twelve tire stores here in the area. My brother has always been paint and body and builder guy by trade. The tire store family are a bunch of gear heads and all my brother does is work on their private stuff. They have several dozen cars from C6Z06 vettes, LSX desert cars and a bunch of hot rods. He turns out some cool cars but no pt stuff. Some of the cars they just fix up and turn. For the most it's a cool job because he does not deal with any customers..just the family. It's a great deal for the guy's to have him on the payroll when you factor what a paint job or fab cost these days. When you have hundreds of people on staff it seems like easy to bury the cost of one guy spread out. Plus if the tire store mechanics wreck customer's cars (which they do) my brother can fix at a better rate. I am just stoked that they let me store and work on my car there.