Need help with designing my AN fuel system - Lateral-g Forums

makoshark · #1 10-06-2008, 07:40 PM

Do I need to add a filter between the main tank and the low pressure, holley red pump, or can I get by with the filter sock on the fuel sender? I have a 10 micron filter to go before the high pressure pump after the surge tank.

**camcojb** · #2 10-06-2008, 08:00 PM

Quote:

Originally Posted by makoshark

Do I need to add a filter between the main tank and the low pressure, holley red pump, or can I get by with the filter sock on the fuel sender? I have a 10 micron filter to go before the high pressure pump after the surge tank.

sock should be fine. You want a 100 micron pre-filter, not 10 micron before the pump. 10 micron is for after the pump only, too restrictive before the pump.

Jody

makoshark · #3 10-07-2008, 01:37 PM

Ok, so I have a 10 micron filter to go after the pump between the pump and the injectors. Do I put the filter before the regulator? Do I need to get a 100 micron filter to place before the main pump? I was assuming the sock on the fuel sender would take the place of the 100 micron filter.