68 Camaro Air ride??

[ProdigyCustoms]

Air Ride is the way to go for you. No need for a aftermarket subframe. Some of the baddest Pro Tuouring cars around run Air Ride.

For brakes, bling for the buck, our Prodigy Customs Total Car G Machine Brake Packages are hard to beat. You get everything you need all the way down to the fluid and special tools you need. Your doing this yourself right?

As with almost everything else you will need for the car, we have both these products.

[camaro2nv]

Originally Posted by ProdigyCustoms

Air Ride is the way to go for you. No need for a aftermarket subframe. Some of the baddest Pro Tuouring cars around run Air Ride.

For brakes, bling for the buck, our Prodigy Customs Total Car G Machine Brake Packages are hard to beat. You get everything you need all the way down to the fluid and special tools you need. Your doing this yourself right?

As with almost everything else you will need for the car, we have both these products.

Perfect, Yes ALL work will be done myself. Do you have a link to the brakes? What about the rear end? Ive been reading up on the G bar. Do you guys sell it? I dont have a lot of knowledge about parts for this car. Im trying to learn as fast as I can . Thanks for the help guys!

[rich-allen]

I'm running the G-bar (the original one) and it's pretty good. Most here will agree when I say the DSE kit it much better, here is a link. http://www.detroitspeed.com/productp...uadra_prod.htm

Frank sells an upgraded kit for the G-bar and a lot of guys are running that too.

Either way you should be fine.


Rich

[rich-allen]

I forgot to mention that I'm running my stock subframe as well.
I didn't go with Air Ride but I did replace everything else with aftermarket.

So Frank is right, you don't need an aftermarket SF however, the ATS subframe kits are smoking bad ass!~

[camaro2nv]

Originally Posted by rich-allen

I forgot to mention that I'm running my stock subframe as well.
I didn't go with Air Ride but I did replace everything else with aftermarket.

So Frank is right, you don't need an aftermarket SF however, the ATS subframe kits are smoking bad ass!~

I hear ya! Just that look is killing it! I want SUPER clean!

[camaro2nv]

I just got a call on my stock subframe. I listed it for 1000.00 complete. Maybe I will just sell it.
Being that I run a wheel/ after market shop I should be able to get hooked up on some stuff.
Man I need to finish my bathroom remodel so I can down on this car. Right now every time I touch the car the wife gives me a sideways look Man the deals me make

[rich-allen]

You run an aftermarket wheel shop?
Cool.

DSE subframes are nice and expensive but very nice, art morrison is swqeet too. The ATS kit was used on the One Lap Camaro build, very sweet indeed.


You should be able to find a SF from the sponsors on the left too.


Rich