69 FASTBACK (project 57)

[Blue70]

Looking good!!

[aussiebj]

Heres what 2 afternoons and some 1/8th plate can turn into ..finished the LH upper rear mount...

[aussiebj]

Fabed up the RH upper mount today ,I am going to put the body on tomorrow...

[aussiebj]

11/23/08 update set about mounting or aleast setting the body on the frame ..here are the progression pics......
moved frame outside..

lift body up


body comming down

need to remove some tired metal

[waynieZ]

It looks nice sitting on there

[aussiebj]

Hope everyone had a good Thanksgiving...got back to work on the stang ..
Today i removed and replaced the driver side inner and outter rocker
Rusty Rocker

Rocker be gone

Test fitting up the completed piece

And "whala" here is the new rocker installed

[aussiebj]

Weekend update 11/30. worked on the passenger side rocker and then i got a piece of molten metal in my left eye..had it removed today and all is good i had glasses on it must have got in there when i was using my plasma cutter....always wear good protective gear......here are some pics
The rockers are made up of three different parts welded together

pass rocker removed heres a shot from the inside