cheap subframe?

[dhutton]

Originally Posted by VP23271

jcal87,

Check out the "One Lap Camaro" project. He stuck with the stock subframe and modified it to coilovers with some Chicane brackets from ATS.

https://lateral-g.net/forums/show...t=onelapcamaro

I am going the same route and it should be more than enough for me. I am also adding a Lee power steering box, Global West upper and lower arms plus ATS tall spindles.

I think he used the ATS Chicane LM kit which if I remember correctly costs $4900 plus the labor to weld in the coilover brackets. Once you're done it is essentially as good as the DSE and AME offerings from what I have read.

Don

[jcal87]

not worried about welding labor went to welding school for three years can do everything but tig and i have even dabbled in that a bit just wouldnt call myself a expert

[Musclerodz]

Originally Posted by dhutton

I think he used the ATS Chicane LM kit which if I remember correctly costs $4900 plus the labor to weld in the coilover brackets. Once you're done it is essentially as good as the DSE and AME offerings from what I have read.

Don

And will never be another since Tyler discontinued that kit nearly a year ago.

[dhutton]

Originally Posted by Musclerodz

And will never be another since Tyler discontinued that kit nearly a year ago.

It's still on their website so I assumed it was still available. The price listed is $4750.

Don