Hydraulic Throwout Bearing Issues (maybe) - help! - Lateral-g Forums

James OLC · #1 02-05-2009, 12:32 PM

Thanks Jody, I appreciate you comments and agree. Those are the same conclusions that we've reached and we're addressing the hydraulic issues now. If need be we'll look at switching out the master cylinder to a 7/8" bore when we get the car to California.

Avgasman · #2 02-05-2009, 05:27 PM

I'll be watching this thread closely James. I did purchase an ATS modified TOB as well as the McLeod RST and am still quite a ways away from trying it out.

I do agree that those burn marks do appear to be a problem, especially with only a hundred or so "hard" miles on it.

Best of luck.

JETSET700 · #3 02-23-2009, 11:37 AM

James , I hope things are getting resolved. I am yet to start my car & it has
the same or close setup from ATS. I'm not positive on which TOB I have, I think it's the McLeod bolt on. Very interested to see what your solution to problem is.

Peter