Tricks or Ideas on how to remove glue from interior floor? - Lateral-g Forums

**Steve1968LS2** · #1 10-04-2005, 02:21 PM

Quote:

Originally Posted by TravisB

We use some stuff called Speedy 500 here at the body shop to remove molding adhesive on doors and stuff! not sure if will work for your app but it is worth a shot!

Hmm.. I wonder if my local auto paint supply shop would carry that..

907rs: Gotcha.. no matches near the thinner.. lol

Thanks for the tips.. all suggestions are welcome!

TravisB · #2 10-04-2005, 02:40 PM

All paint stores around here carry it.........! Good luck

Fluid Power · #3 10-04-2005, 03:41 PM

This thing works great....won't damage the floors either

http://buy1.snapon.com/catalog/tools...e=snapon-store

it is a bit spendy, maybe you could write a review of it for the mag...

Darren

B Schein · #4 10-04-2005, 06:55 PM

I’ve used those tools before, scary to run make sure your shirt is tucked in and you have on safety glass. Those wires really hurt when they come off the wheel.

squid · #5 10-05-2005, 12:27 AM

After some elbow grease annd a putty knife, I used a wire cup brush on a 4" Angle grinder. It bared the metal but didn't cut into it. It looked like like brand new when I was done. It was a shame to cover it up. I used hammerite to spray it and then dynomat extreme.

**Steve1968LS2** · #6 10-11-2005, 09:30 AM

By the way..

I tried the GOOF OFF stuff in a spray can.. just dusted and area with it and it all came up VERY easily with a putty knife.. I was amazed at how well it worked!

I just need to wipe it down with laquer thinner and then go to town with the POR-15.

All original floors with just a tiny bit of surface rust. Looks like she once had welded in race seats.

Damn True · #7 10-11-2005, 09:55 AM

This is the best tool name ever!

http://buy1.snapon.com/catalog/item....re&dir=catalog

Tool, Air, Crud Removal

LOL!