Sorry but I'd not seen F-Bomb until yesterday when some one asked to see the two dog fight when we're done.
Thanks for all the kudos I want to try to get this one cranked out asap. Since I sold my 57 Sedan I've been without a cool car. And its getting to me. So with our further ado here's another update
With the new equipment we’ve obtained and the addition of the laser cutting to our arsenal we’ve decided to scrap the original frame for several renovations making it stronger and simpler to build. The easer to build the frames the lower the price will be. We’ve started over with the design taking everything to the computer to so we can look at every aspect of the chassis. This is how we will start playing with sizes and reference them to clearance on the car. Next we’ll take the corvette suspension geometry and plug it into Suspension Analyzer and then find the specific angles and mounting points of for the suspension that will best work for the trucks.
Parts have been rolling in steadily and work is progressing on the body. The Air Ride bags have been here for some time and we’ve been playing with them but the Air Ride 4100 Level Ride System just got here. You can see the details these guys go though to make sure you have everything. It never ceases to amaze me the quality in each box. You can see the considerably longer bags in for the rear pivot system. The two aluminum bottles on the corner are going to be 2 of the bombs for our bomb racks. These will be sealed and plumbed to act as air tanks for the air ride system.
These are the tires going onto the PT-57 so we can put all this effort to the ground. The right is a 354/35/R19 for the rear and the left is a 275/40/R18 for the front. (no it’s not the actual tire for the front but I couldn’t get to it right then.) And a little reference for the guys who’ve never seen a 345 in person.
The Transmission got painted then we noticed the case had that ear cracked on it, taped it with a hammer and chased it down. We’ll clean it up and patch it back up later. The motor and transmission goodies all came in a few days ago too. The custom PTC torque converter, custom cam, dual valve springs, titanium retainers, all the gaskets and bolts that would need to be replaces also come with Thunder Racings swap kit all shown here.
The 6.0 is in another chassis having headers fitted right now but the next set will be the same. We get the LS1 Street headers from LG Motor Sports then modify them to clear the transmission. Their tight and clear the steering linkage beautifully, plus there stainless.
THANKS TO: A&M Machine and Fabrication, CCTek (http://www.candctek.com), Hermance Design(www.hermancedesign.com), Paradise Road Rod & Custom, Harry Opfer Welding, Wegner Automotive Research, Clayton Machine Works
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Can't wait to see this come together
Hybrid Mode
