Project PT-57, 1957 Truck, Built By Hot Rod Jim's - Lateral-g Forums

Garage Dog 65 · #1 10-05-2009, 03:50 PM

Hey Russell, You might check and see if someone has the C5/6 trans adapter already. I saw the unit in Good Guys Columbus 2 years in a row on a purple chassis of a vendor using the chassis to demo an exhaust cutout/bypass product. (maybe another member here remembers that product and/or vendor) They took a transmission tail shaft - reversed it and used it on the input of the Diff like you're showing in the solid works diagram above. It bolted right up with no cutting or mods. I have pics of it at home - but I'm in Miami this week.

rat_rod_russell · #2 10-07-2009, 02:56 PM

Quote:

Originally Posted by Garage Dog 65

Hey Russell, You might check and see if someone has the C5/6 trans adapter already. I saw the unit in Good Guys Columbus 2 years in a row on a purple chassis of a vendor using the chassis to demo an exhaust cutout/bypass product. (maybe another member here remembers that product and/or vendor) They took a transmission tail shaft - reversed it and used it on the input of the Diff like you're showing in the solid works diagram above. It bolted right up with no cutting or mods. I have pics of it at home - but I'm in Miami this week.

I've been watching your Porsche build since your 4th or 5th post. I have a 69 911 I'm going to do if I don't sell it before SEMA. I haven't seen but one other adapter for the C5 differential and they wouldn't sell it. Plus I'm almost done.

I just got the input shaft in now to make the press on sleeve for the clip ring and bearing face and we're done.

LET THERE BE BOOST!!!!

-Russell