69 Camaro "War"

[DOOM]

Jason I went through your build thread and have a question... Can you tell me what method you use for closing or opening the body gaps.

[War]

Originally Posted by DOOM

Jason I went through your build thread and have a question... Can you tell me what method you use for closing or opening the body gaps.

1/8" round bar and welder for closing, grindin and weldin for opening. There alot in of steps and it takes alot of time. I hammer and dolly edges as flat and thin as I can get before adding or removing material. On edges of quarters and such if there soft I will cut and add rod to get a sharp edge. You have to go slow and take your time with lots of hammer and dolly work. I seen some guys make a mess out of panels. Pacual said you can have your gaps out of bondo or metal, you choose.

I had to re-skin both doors and I fully welded the inside so there are no seams

Here is some pics of the doors

[War]

Here some more of the doors and finishing some edges.