69 FASTBACK (project 57)

[waynieZ]

It looks great, nice work.

[aussiebj]

12/3/2010 Hope everyone had a safe and happy Christmas and New year...started back in on the stang .she is now a roller after i refabbed up the rear and modified the rear the suspension... here is a sneek peek of the interior i am going with...It should look familar..its out of an 08 stang

[aussiebj]

Fabbed up the shifter mount and installed the driveshaft cover...next will be the installation of the hand brake handle and the rest of the tranny tunnel.....

[aussiebj]

I took advantage of the nice day and pushed the car outside for some pics..hopefully it will be off to the body shop in three weeks...here ya go...

[65 347]

looks good, can't wait to see this finished

[aussiebj]

1-24-10....well the car is finally all together...worked on the inner structure under the rear seat..shaved the door handle on the pass side...finished up the trunk sheet metal and sat the tank in there.....removed the rear to finish welding it up and make some gussets for it as well..now for underneath clean up ,seam seal and get it ready for the Lizard skin undercoating...here are som pics....
under seat in work

and welded up

Fuel Tank in

Rear end gussets

[aussiebj]

some more pics
Pass Inner fender in

Pass door shaved