Metal Work Time Frame (for my '69 Firebird)?

[customcam]

The way Frank does hes business is Professional!
If a builder cant give you an exact quote upfront, either a couple of things are happening. Ill let you figure that out.

[67rstbkt]

You could always do it yourself and save the cash for other stuff..... I'm having a great time figuring out how to put together all the sheetmetal on mine. After the initial WTF did I get myself into, it's turning out to be easier than I thought.

[GregWeld]

I was thinking that a better post of this type of question would have been - "my shop has quoted X for X X X X work" - does this seem reasonable and customary for that kind of work. That way - people that have done this work - or had this work done - would have a better idea of the scope of work.

[nvr2fst]

Originally Posted by barraza

That is true in some cases, but for a shop that knows these old cars, it is fairly easy to quote hours. A quarter panel replacement is a book hour number. New problems should be quoted as they come up. Giving anyone open time and materials is a receipt for disaster, never do it.

With detailed pictures of my car, and the understanding of the how it would be worked in, Frank at Prodigy gave me a detailed time and material cost breakdown for my paintwork and metalwork. It was done exactly as promised and done WHEN promised. It costs no more to get it done right the first time.

Originally Posted by GregWeld

I was thinking that a better post of this type of question would have been - "my shop has quoted X for X X X X work" - does this seem reasonable and customary for that kind of work. That way - people that have done this work - or had this work done - would have a better idea of the scope of work.

I agree that it should be presented as Greg stated. On the other hand there are plenty of shops that can quote to a tee like Frank. You typically can not approach the shop your stating saying " I belong to this forum and they said"
If there not used to doing it or familiar with "that" car any shop is going to estimate to cover there a!!. Almost all my past cars (not present) were quoted up front for work done and they pretty much stayed true to the initial costs. (Were talking basic panel work, wiring, paint etc.) But I went to shops that were familiar with that car or street rod. In the end if your gut says somethings not right...move on.

[ItDoRun]

Originally Posted by 67rstbkt

You could always do it yourself and save the cash for other stuff..... I'm having a great time figuring out how to put together all the sheetmetal on mine. After the initial WTF did I get myself into, it's turning out to be easier than I thought.

I'll second that! I've learned a lot myself with the help of such a great site and great community here on Lateral-g.

I say bail off in it neck deep and do it yourself. There's plenty of people on this site that can walk you through it, but if you prefer to bring it to someone, that's cool too.

Just post plenty of pictures as you go through the build. We like progress photos!

[burntnova]

Originally Posted by ItDoRun

I'll second that! I've learned a lot myself with the help of such a great site and great community here on Lateral-g.

I say bail off in it neck deep and do it yourself. There's plenty of people on this site that can walk you through it, but if you prefer to bring it to someone, that's cool too.

Just post plenty of pictures as you go through the build. We like progress photos!

I agree jump in neck deep and do it yourself. It might take you allot longer to complete your project but the self gratification is unbeleivable and ther eis plenty of guys & girls on this site that will help you through any problems you may run into.

My project is a 70 nova and I replaced both rear Quarter skins, Outer wheel houses, tail panel and did allot of repair work on some other areas of the car with no previous experience of panel replacement. The pictures people post on this site helped me through every step of my work. Just have to get over the initial fear of doing it yourself.

[door-ajar]

yeah man ,try to do it your self,in my case i have too because i can't afford too have it done ,but i don't mind ,i have to replace the entire back sheetmetal on my 70 camaro and most of the floor pan on my nova,but hey if you get into it and decide you don't want to do it you can always take it to the shop ,and if you do ,is he going to coat the insides because that takes time to

[Ron Fox]

Thanks to everyone's response and help. Please keep the info coming.

I am not a car builder, car painter, or engine builder. I only know the very basics of a car so that is why I am having my car built. But I have put many hours into my car by doing what I can do which has help me learn and save money in area's such as cleaning parts and media blasting smaller parts. I have faith in my builder and I did my homework on him months before I took my car to him. This is a great site and asking questions and comparing everyone's answers to my builders answers is helpful to me.

I will post pics later. I have a new laptop and for some odd reason I am having trouble posting pics. I will have to post pics from my office computer.

Thanks.

[Ron Fox]

Here are a few pics as requested.

Thanks.