What's up at Ironworks Speed & Kustom.

[War]

That hood looks way better!

[ironworks]

Well we also started on a 1955 for a another local guy. We wants just a bad ass black cruizer 1955 chevy with a big horsepower Big Block. We put Prototype #1 of our tri five chassis's under the the car and and have begun mock up. We have to do floors and trunk. We will be mini tubing the rear to run 335/30/20's and have 275/35/19's on the front. The car will sit about 4.5" to the bottom of the frame. We are looking at possibly debuting this at SEMA this year. Carter Hickman did a nice quick rendering for us on the direction we are looking at.


The as it came in on a Thursday

Monday afternoon we had the body in the main shop ready for the chassis

Tuesday Morning we are setting the big Block in the chassis

Enter the 540

Prototype #1 of the chassis

[ironworks]

Well We finally got Eric's car to the point we could pull the body off the table and set it on the ground. It does not have the control arms back from him yet as he is digitizing the mock up arms we made. But man it looks good on the ground. The very tall camara man makes it look even lower.