Taillight feedback wanted

[G/A-body]

Originally Posted by JayR

I like it! Way to incorporate cool aftermarket parts from a completely different vehicle. I like the first one a lot but could only see the next one working if your bumper ends had almost that much angle or the different angles will fight each other.

Jason,

Much of the reason I made the selection I did was because there is some angle to the bumper end. Is your suggestion to make the end of the bumper angle closer to that of the taillight? If so I would have to see how much that impacts how the bumper aligns with the quarter panel.

Thanks for the input. Hopefully someday it will ride on Rushforth Wheels.

Robert

[JayR]

Originally Posted by G/A-body

Jason,

Much of the reason I made the selection I did was because there is some angle to the bumper end. Is your suggestion to make the end of the bumper angle closer to that of the taillight? If so I would have to see how much that impacts how the bumper aligns with the quarter panel.

Thanks for the input. Hopefully someday it will ride on Rushforth Wheels.

Robert

I knew there was some angle to the ends but it was hard to tell from your first overhead photos. After seeing the new pics, I could go either way.