new project / already having a blast

[tones2SS]

Sorry about the fitment issues. Car does look good though!
GOOD LUCK & keep us posted.

[67ragtp]

I finally got to install this humongus tank, had to cut a huge hole in the inner fender well. I did it with a dremel and composite blades, believe it or not, three blades did the job. Easy to cut curves with out having to take out the monster air tools. here's a few pics.
Ive been trying to find out which port on the ls7 oil pan is the supply(front or rear) and which one is the return. If any of you guys know please let me in on it, I must have searched four different sites and couldn't find anythng. I beilieve the top port on the resivoir is the catch can the next one down is the oil return and the bottom goes to the supply. Just need to know what each one is at the pan.


Thanks Rich

[DOOM]

Keep em comin Rich !!! Lookin good!!!!

[67ragtp]

I made a little more progress, takes forever to do things when you can barely walk around the car. I need my head examined for doing this in these conditions. Ok enough bitch'n. Got the rear bumper bolted up, installed the column, pedal assy and electronic gas pedal , parking brake, installed the rear brake line and had inline tube make me a few lines from some templates I bent up. Im not very good with the flaring tool, so I just bend the lines and send them over to inline, BTW very nice people to work with. Hydratech hydroboost and clutch slave and resivoir are in. I used the autowire classic update harness.




Gas tank went in with no suprises, I talked with Hector last night from Ricks, what a nice guy, couldn't be more helpful.


Rich

[tones2SS]

Looking good Rich!

[awr68]

Looking great! Awesome build!!

[waynieZ]

Thats looking great ! Glad to see your getting time to work on it (even if it is cramped in there). Rich whats on the inside floor I know Mike sprayed some insulation in there but whats on top of it?