GM A-Body Air Ride Kit Level 3 Complete and narrowed Currie rear end

[patoke]

JBrown is looking at the brake setup, if he doesn't take it then I will let you know CreepinDeth.

I can't seem to post the pictures of the rear end so PM me if you want me to email you pictures.

[patoke]

I forgot to add that I have a Flaming River manual steering rack as well. It is in the pictures in the first post.

[patoke]

I was off on the Currie 9" rear end width. It is 53.5" backing plate to backing plate. I was used on a 65 Chevelle wagon with narrowed frame rails and 335 rear tires for less than 1000 miles.

[65_LS1_T56]

Originally Posted by patoke

I was off on the Currie 9" rear end width. It is 53.5" backing plate to backing plate. I was used on a 65 Chevelle wagon with narrowed frame rails and 335 rear tires for less than 1000 miles.

Anymore pics of the rearend? What is the overall width (wheel mount to wheel mount)? Since the frame was narrowed on the wagon, were the brackets moved inboard on the axle tubes too? I have "notched" my frame for 295's but left suspension points alone.
Shipping to 48446? thx.

[patoke]

I will take some more pictures this weekend. I am not sure if the mounting brackets have been moved as I bought the rear end this way. I can take any measurement you need. Just let me know what you want.

[patoke]

More pictures of the rear end

[patoke]

Still for sale. Make offer. Price on the air ride kit lowered to $3000 shipped anywhere in the lower 48 states.

[jeeper90]

are the brakes and colum available?

Thanks
Chris