71 Cuda Pro-Touring Build

[mrgm]

Good looking. I too will follow this progress.

[johns cuda shop]

I installed the front and rear Reilly Motorsports Coilover suspension this week. Whats next is checking the fitment of my tires, and starting on the brakes. The oil pan for the hemi is on back order right now so I have to wait for the mock up install at the moment.

[johns cuda shop]

Welding up all the holes in the firewall. A smooth look is what I am after. I ran the brake line behind the firewall. I got the Hydroboost unit off a astro van . Wilwood master and clutch master and ajustable proportioning valve. I getting ready to run brake line to the back next and cut the transmission tunnel for the 6speed.

[coolwelder62]

Look's great.

[johns cuda shop]

Working on removing the transmission tunnel for the T56. More pictures to follow shortly

[johns cuda shop]

I cut the transmission tunnel out today. My focus is to get the transmission up into the tunnel and keep the driveline angle at -01 degrees .I will make up the trans crossmember after I install the motor. more pictures at http://s1187.photobucket.com/albums/...uring%20Build/

[scottysimp7]

Gotta luv the cuda'! Great looking project