Hey Blake you don't use the gulstrand mod setting and the tall spindle together do you? Is it one or the other? So I use the g-mod loctation on the sub and the tall spindle correct?
On a 69 Camaro, can you run the high clearance uppers and lowers with afx tall spindles on a stock sub with the Chicane kit.
On the stock subframe you CAN use the Hiclearance Upper Control arm with the TALL Spindle and the Chicane Coilover conversion, Actually that is the EXACT set up the OneLap Camaro uses. so that should tell you how well it works.
The Hiclearance LOWER control arms are ONLY for the Speedtech Subframe.
Hey Blake you don't use the gulstrand mod setting and the tall spindle together do you? Is it one or the other? So I use the g-mod loctation on the sub and the tall spindle correct?
Thanks
Again
John
If you are talking about our subframe? then you would "Normally" NOT use the G mod location when using the Tall Spindle. you wouls use the G Mod location with the stock spindle ort thr short AFX spindle.
this also goes for the Stock Subframe.
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Hybrid Mode
