1970 Firebird Formula 505ci EFI

[BritishGreen68]

Looks good! Do you have a booth or using a local one?

[lhkustoms]

Originally Posted by BritishGreen68

Looks good! Do you have a booth or using a local one?

Chris I have a booth here at the shop although this car was painted in MI where Kevin used to live. You are pretty close and are welcome to come by anytime. Just give me a call

[awr68]

Looking good! Have you thought about coating the valve covers black to help balance out the colors of the motor? I am trying to figure this out myself.

Still need to make my way over there! Perhaps I will bring Bryce and the boys can hang out?

[lhkustoms]

Originally Posted by awr68

Looking good! Have you thought about coating the valve covers black to help balance out the colors of the motor? I am trying to figure this out myself.

Still need to make my way over there! Perhaps I will bring Bryce and the boys can hang out?

Tony..... Funny you mention that. Kevin and I were talking on Saturday about this and we are going to anodize the v/c and paint the logo body color. we are also going to black ano the fuel rails, dizzy clamp and water neck also. The headers he ordered from tribal tubes are supposed to be a black thermal coating as well if they ever show up . we are also going to black chrome the bumpers, tail lights and trim so the motor will have no shiny on the entire car.

Feel free to come out anytime and it would be cool to bring bryce out as well. Dave Oh has brought Luke out a few times. Always fun.

[awr68]

Very cool! That will look great!

[lhkustoms]

Ok time for the long overdue update!
we've got the entire inside of the body coated in lizard skin insulation and sound control. Began wiring in the new AAW classic update wiring harness and the FAST EZ EFI harness. I removed a few lbs of wire on the efi harness since each wire is about 3 ft too long. Pulled the harness apart shortened it up and cleaned up the routing and added a braided loom since i cant stand "split loom"
Kevin decided to swap out his QA1 coilovers and global west a arms for Pro Touring F body Tubular arms and Ridetech SA coilovers. We are also going to be mini tubing the car and adding a Ridetech Air Bar in the rear.

[lhkustoms]