Problem with Driverz inc-Speedtech Install

[JustinB]

Originally Posted by raguemoe

I spoke to Jon and he said he will take care of it. He said the wheels are no big deal, he will re-hoop them to the correct offset and he's going to contact Speedtech and find out what he needs (ie brackets) to correct the rear end. His shop is full, but said he will follow up with me friday & try to have room next week.

Did everyone miss this post? It looks to me like he is doing what he can and the OP is ok with it.

[DriverzInc]

Originally Posted by JustinB

Did everyone miss this post? It looks to me like he is doing what he can and the OP is ok with it.

Nobody ever reads the good stuff Justin, you know that. I'm just the "asshole" that ****ed someone is all anyone will take away from it, and doesn't matter if we do the right thing or not, everyone not involved, and never owned a business thinks they could do it better.

[raguemoe]

Ok, I think we all need to step back and calm down a little.

Yes, Jon I did bring it to the forum before I talked to you today, but after I told you about it over 2 months ago and still haven't rec'd an explaination as to why the rear was installed off center. And after you told me everything was fine & using the panhard bar to center the rear was ok.

Going back to my original post, I wanted to see how or why you would install the rear 1" off center. And see if I was out of line thinking this should be corrected. I'm not here to tell anyone how to run there business or hurt their business, but felt the problem wasn't being taken serious. I didn't understand how the installer didn't notice that the rear was off by so much.

For everyone that says Jon needs to jump one this asap & take care of the customer. That is not the issue. I'm not in a hurry, I'm not trying to bash Driverz Inc or run him out of business. I have a problem, which Jon has agreed to correct and I'm good with that. And if my car is tweaked somehow & requires additional parts and/or labor to correct I'll be happy to pay for it.

So please guys, lets not turn this intona bash Driverz Inc & Jon deal and get me back on the road!!

[Blake Foster]

If you need any drawings to check measurements or any other info feel free to call 1-888-467-1625 or email me directly. [email protected]

[raguemoe]

Originally Posted by killer69

If you need any drawings to check measurements or any other info feel free to call 1-888-467-1625 or email me directly. [email protected]

Thanks for the drawings/measurements. And offering to send out a new set of brackets @no charge as soon as they are available!

[raguemoe]

Update:

Jon, per our last conversation you were going to call me today. What happened???

[Flash68]

Originally Posted by raguemoe

Update:

Jon, per our last conversation you were going to call me today. What happened???

Not taking sides here... but just out of curiosity, did you try calling him?

[raguemoe]

Nope. He said he was going to call me & I left it at that. I don't know about you, but when I say I'm going to do something I do it!