Your ABS and Floater Solution

[Ron in SoCal]

Originally Posted by chicane

I'm getting to that Ron... to include the BOM and individual pricing for the components.

This is only going to be available thru one singular dealer (who is also at Lat-G sponsor) so I gotta get the details worked out with them as far for any pricing is concerned.

Right now I am starting on the finalized Chevrolet product's.

Right on Sir! I emailed Mark after he leaked out a few details on his set up. I already have a couple of c6 hubs and not running an eBrake so (from the pics) it looks like I'll need the axle end/bearing carrier, radial caliper bracket and your spec axles. Sound about right?

Congrats on an simple/effective design! Can't wait to hear the field report...

[chicane]

Originally Posted by Ron in SoCal

Right on Sir! I emailed Mark after he leaked out a few details on his set up. I already have a couple of c6 hubs and not running an eBrake so (from the pics) it looks like I'll need the axle end/bearing carrier, radial caliper bracket and your spec axles. Sound about right?

Congrats on an simple/effective design! Can't wait to hear the field report...

You will still need the backing plates in place, for the 'mechanical stack' and the hubs will need to be "ZR1" hubs as they too will need to be modified.

[Richio1]