Project 'Too Much': 1969 P1800S - soon to be P1800 GT

[Iamtheonlyreal1]

That looks pretty cool, but I do have a question. Do you plan on cutting away the original unibody structure on the front end? From my experience, the original body structure will not support the upper control arms at that length and width. The unibody upper control arm relief is not wide enough to accept any standard width arm through the opening.

I had to engineer some custom length arms, that would fit outside the unibody frame rails, in order to prevent the cutting away. This also added more engine bay room over the OEM, because the typical upper control arm intrusion was gone.