Pioneer Stage 3 LSA 69 RS SS Camaro

[Camarodave69]

Yes please send it to me. Electronics are my specialty. I want to use one of these switches for mine if you don't mind me stealing your idea. Have you had a chance to look at the newer 2010+ Ram switches? They look really nice. I might have to use one of those.

[Unit2]

Originally Posted by Camarodave69

Yes please send it to me. Electronics are my specialty. I want to use one of these switches for mine if you don't mind me stealing your idea. Have you had a chance to look at the newer 2010+ Ram switches? They look really nice. I might have to use one of those.

Here is the the way i wired as described in the previous thread. rotate once and the main beam comes on, pull out for parking lamp and the rotate once more and that is high beam, fog lamp position is still pulled out for parking lamps. Then as you rotate off all the positions cancel and the fog lamp switch closes. One thing I need to mention is that I am using a ISIS power master cell and this allows for this type of low voltage switch to make the lights work.

The second diagram is the circuit for the Dodge Dakota. I can email you larger files this site does not allow larger images, if needed send email and forward them over to you. I am sure you will figure it out.

PS Do you happen to need a 14 in rearbig brake kit for your camaro? Check out my listing on Parts for Sale. Wilwood Ford Big brake kit

[Camarodave69]

Thanks for the wiring diagrams. I really appreciate you going through the work to post it here. I will definitely put it to good use. Those switches are going for a really good price on ebay. I'm going to go ahead and order one.

[Unit2]

Originally Posted by Camarodave69

Thanks for the wiring diagrams. I really appreciate you going through the work to post it here. I will definitely put it to good use. Those switches are going for a really good price on ebay. I'm going to go ahead and order one.

I am happy to help you out and i hope it works out as well for you as it did for me. Let me knowif you have any additional pinouts that work better than what I did. If you have any more questions let me know and i will be glad to help. Here is another detail item I am adding to the car. A small emblem " Made in Detroit" This was made from a keychain and i am adding this to the lower fenders for an accent. Check out the image.

[Camarodave69]

That's a really cool idea. How do you plan on mounting it? Are you going to recess it into the fender or just apply some double sided adhesive?

[Unit2]

Originally Posted by Camarodave69

That's a really cool idea. How do you plan on mounting it? Are you going to recess it into the fender or just apply some double sided adhesive?

Actually i am using high power magnets. These work killer and gives me the ability to move them around. Once i have a spot may resort back to good old double backed 3M tape. This works very well. If your interested in the logos go to madeindetroit.com and you can buy them on line.

[waynieZ]

That dash looks killer! Awesome job.