THANKS TO: A&M Machine and Fabrication, CCTek (http://www.candctek.com), Hermance Design(www.hermancedesign.com), Paradise Road Rod & Custom, Harry Opfer Welding, Wegner Automotive Research, Clayton Machine Works
The instructions are very straight forward and yes Casey will answer any questions u have. One of the best front drive kits i have ever bought. Attachment 34279
Did your kit instructions have pictures of the parts and which part# they were?That is where it gets confusing. I don't know which bracket is which. Mine did not have pic references. I have a different kit than the one you have pictured.
__________________
68 Camaro "Bloodline". OZMO Twin DBW LS3 with TSP 231/236 cam, Speedtech frame, Ridetech coilovers, Chassisworks G Billet/Fab 9, Asanti 19's, Fesler brakes, Carbon Anvil everything, etc.
[SIGPIC][/SIGPIC]
Yes it had a picture of the parts but not which ones they where. I would look on there web site and see which kit u have and look and see what part goes where. They did have the part numbers listed for which part but not with a picture to show which was which part. Give them a call and im sure they can walk u tru it all.