The key is to wipe them down with alchohol before you run the engine the first time. If they are coated, you bring it up to temp and shut it down and let them cool off. Coated or stainless, they are going to deteriorate cosmetically with miles.
Roller cam motors don't need breaking in... and if it's a crate LS3 just fire it off and go drive.
GREAT QUALITY SS headers are one thing.... not so great SS headers look nasty after awhile... so the answer is "all depends". Like many here - I like the look of good quality SS turning gold etc... but not so much the nasty stuff. They need coating.
The headers on my '32 are polished FOOD GRADE SS -- and when they first turned I didn't like it -- but I've gotten over that and now don't mind them colored.
What effect does wiping the headers down with alcohol produce?
It removes oils which would otherwise burn off and add to the tarnish.
In another thread someone mentioned treating them with rain-x, which others verified worked. Not sure what the science is behind it, and never tried it myself, but I'll be looking into it.
Here's the Akrapovic stainless header on my KTM SDR, only thing I've used on it is WD-40 which Akrapovic actually recommends. My regular cleanup routine involves wiping the exhaust system down with WD-40.
I'd say its decent stainless based on the coloration though it has seen very little wet weather usage.
Here's the header as new:
Last edited by Sieg; 03-18-2012 at 12:47 PM.
Reason: grammar
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Hybrid Mode
