My idea is to make patterns for as many makes and models of cars as possible. I'm just starting with what I know, own, and had access to.
I'm working on pricing, but it's not possible to give a figure that is correct yet. All I can say is under $300 for sure, but over $175. Trying to make it by hand in America is not cheap.
After participating in your survey and working with these covers:
Over the last 2 weeks I've been in the process of replacing my brake system and steering box and the exposed areas front and rear of the fender cover are an accident waiting to happen. The other annoyance is the number of times my vision was blocked by the fender cover due to no radius at the wheel-well. I also appreciate your magnetic securing system vs. my spring clamp method. Good work.
I would take a set or two- looks very professional and the customer coming into the shop would like to see that extra measure of care. My wife would like me more for not loading up the washing machine with blankets all time
__________________
[SIGPIC][/SIGPIC] CHRIS HOLSTROM CONCEPTS
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Hybrid Mode
