DSE M/C & Booster parts #'s

[aps63]

Does anyone out there have a DSE m/c & booster combo.
I need the actual part numbers cast into the pieces.
One from the master cylinder and one from the booster. The reason behind this is that DSE tells me that this mc & booster combo is an old design and no longer available.

I want to use the screw on cap type of reservoir as used on their test Camaro's.


I don't like the snap on top of the new DSE design.




Any help would be appreciated.
Thanks,

[aps63]

Thanks for the input Jay.
The reservoir is an AC delco unit(DSE told me that).
I just want to find out which one it is. They say they have no records of which reservoir they used but it's on both of their test Camaro's and they sold it to the public. I'm not trying to steal company secrets I just like the unit that they used and would like to use it on my car. I would even buy it from them. I have bought several other things from them in the past and was very happy.
Thanks again.

[akrapovic]

I believe it is from a c6 vette.

http://www.gmpartsdirect.com/results...umber=19209245

[aps63]

Thanks akrapovic, but that's the one with the sensor.
I'm looking for the one without the sensor.
Thanks again.

[Hydratech®]

AC Delco 18M974

[aps63]

Thanks Paul, I found that one and just got it delivered.



Still trying to find a part number for the booster.
Thanks again.

[73camarols1]

What about a 81 trans am with 4 wheel disc? The brackets will work and its a 9'' dual dia. Just have to check the opening for the master. I think its the larger opening. Bill

[aps63]

Thanks Bill. I think the booster is a 9" dual corvette booster made by tuff stuff. Waiting for confimation on that. Thanks.

[Musclerodz]

Originally Posted by 73camarols1

What about a 81 trans am with 4 wheel disc? The brackets will work and its a 9'' dual dia. Just have to check the opening for the master. I think its the larger opening. Bill

it 1.125 bore master and iron.