What spindles and controll arms do you recommend

[68rssscamaro]

thanks guys your help is duely noted
i am running vintage wheel works on all for corner's sizes are
18x8,s with 255/35 on the front and 18x11 with 335/30,s on the rear
unfortunately i cant use the truturn system(this was my first preferance
but the governing body for car modifications here in Australia will not allow
an adaption of sorts to the original drag link
therefore i can use the ridetech upper and lower strongarm with out using the guldstrand mod(correct me if i am wrong) i can also use there tall spindles is that correct? whilst using the stock draglink,

i hope you guys can see where i am coming from

thankyou glen