Temporary "Roller" wheels for project

[Wissing72]

it looks odd but maybe this will help? 50.00 or so in plywood and a jigsaw...

[NvrDun71]

04-06' GTO spares if you can find them for a good price, which is getting harder to do these days

[Gaslight]

I have these for sale if you are interested.

http://inlandempire.craigslist.org/pts/3561041377.html

Jake

[randy]

if the 5th gen wheels are new then buy them. once you are finished resale

[Apogee]

Originally Posted by gmtech921

it looks odd but maybe this will help? 50.00 or so in plywood and a jigsaw...

Those are sweet! ...and you can stack them up and store them anywhere when you're done.

Tobin
KORE3

[NOPANTS68]

I ran into the same issue. I just pulled the calipers and bolted on some slot mags I found for 50 bucks. I'm running C6 Z06 Kore3 gear on a chevelle.

[intocarss]

Why not make something like these?

[IMPALA MAN]

I built this for less than $350. It bolts together, is made of 5 X 5 square tubing and allows me to work under the car if needed.

[Firebird-Geek]

Originally Posted by intocarss

Why not make something like these?

I actually own a set of "skates" for moving the car around the shop... Just don't own any wheels to set the car on the skates... it came with 15" cheep aluminum wheels with 7/16th wheel studs... I now have 1/2 wheel studs. So these would neither clear the brakes, or bolt up to the car without drilling out the wheel studs... not sure if a person can do that effectively?

Someone said S10 compact spares (94-02) work with larger brakes...??? My brakes are 13" Wilwoods up front 12" in the rear.

[Apogee]

Originally Posted by Firebird-Geek

I actually own a set of "skates" for moving the car around the shop... Just don't own any wheels to set the car on the skates... it came with 15" cheep aluminum wheels with 7/16th wheel studs... I now have 1/2 wheel studs. So these would neither clear the brakes, or bolt up to the car without drilling out the wheel studs... not sure if a person can do that effectively?

Someone said S10 compact spares (94-02) work with larger brakes...??? My brakes are 13" Wilwoods up front 12" in the rear.

There are two common type of lug nuts used on muscle cars, 60 degree conical seat and shank type, both of which are readily available in 7/16-20 and 1/2-20 sizes and can be found for cheap.

Tobin
KORE3