Chassisworks g-Bar and g-Link Misinformation

[camoffett]

I hate to resurrect this but I am having the same issue. I have the G-Link with a FAB9 rear end on a 69 camaro and the filler neck on the rear end is hitting the cross member. I am not far enough along with my build to see if changing the pinion angle will fix this or not.

Question is: Did adjusting the pinion angle fix the problem or did you have to modify the crossmember? I am planning on a very low ride height and it would be great to do any necessary modifications now, if needed, before I get farther along with the build.