2nd Chance Camaro - Let the Project Begin

[syborg tt]

Originally Posted by WSSix

How timely. I was just thinking of messaging Tobin to see if I had any options with his parts should I decide to go with a C clip eliminator kit on my 10 bolt. Do you have any pictures or info you can share on the process, Marty?

Thanks

Trey was kind enough to PM me what he's learned so I thought I would share it with everyone.

Strange has a new kit that they are saying is specifically for street applications that uses tapered bearings. Just thought I'd pass the info on since you said someone mentioned the kit was designed to go around corners.

here is the info and thank you Trey

STRANGE C-CLIP ELIMINATOR FOR STREET APPLICATION

http://www.competitionplus.com/drag-...t-application-



Strange Engineering, Morton Grove Illinois, introduces a new style, specifically designed for street and/or strip, c-clip eliminator for most 10 & 12-bolt GM car rear ends equipped with c-clip style axles. In the past, c-clip eliminators for these applications have been designed for drag racing, which use ball bearings. Ball bearing c-clip kits are fine for drag racing, but are prone to leaking and premature failure when used for prolonged street use. Our specially designed c-clip eliminator kit (A1033) utilizes Timken unit (tapered) bearings, which survive severe side loads and constant use.

The Strange A1033 also features two seals per axle shaft, ensuring a completely sealed axle end. Complete axle and c-clip eliminator packages are also available.

[WSSix]

No problem. Ron and Jerry were helping me in my thread on building my 10 bolt up and they both passed that info on to me. Figured I better pass it on to you as well since you have the eliminator as well.

Line X looks good. I think that'll be the route I take eventually as well.

[kennyd]

Originally Posted by syborg tt

Trey was kind enough to PM me what he's learned so I thought I would share it with everyone.



here is the info and thank you Trey

STRANGE C-CLIP ELIMINATOR FOR STREET APPLICATION

http://www.competitionplus.com/drag-...t-application-



Strange Engineering, Morton Grove Illinois, introduces a new style, specifically designed for street and/or strip, c-clip eliminator for most 10 & 12-bolt GM car rear ends equipped with c-clip style axles. In the past, c-clip eliminators for these applications have been designed for drag racing, which use ball bearings. Ball bearing c-clip kits are fine for drag racing, but are prone to leaking and premature failure when used for prolonged street use. Our specially designed c-clip eliminator kit (A1033) utilizes Timken unit (tapered) bearings, which survive severe side loads and constant use.

The Strange A1033 also features two seals per axle shaft, ensuring a completely sealed axle end. Complete axle and c-clip eliminator packages are also available.

none of this bothers me , he never drives anything !

[syborg tt]

2nd Chance Camaro - Custom Works CF Front Bumbers
2013 06-17 2nd Chance Camaro - Custom Works CF Front Bumbers
www.2ndchancecamaro.com

Good Evening,

I really don't need to say much as they speak for themselves.









Pictures hosted by www.garagescene.net

[Rick D]

Um me likey! So where did you get those??

[syborg tt]

Originally Posted by Rick D

Um me likey! So where did you get those??

http://www.customworksproducts.com/

[214Chevy]

Front bumperettes looking good Marty. Now you gotta get the matching rear carbon fiber bumper too, you know?

[syborg tt]

Originally Posted by 214Chevelle

Front bumperettes looking good Marty. Now you gotta get the matching rear carbon fiber bumper too, you know?

Not to worry it's on order the rear bumber is on order. I am also going to have the front spoiler, the new 3 piece rear short Spoiler and the rocker skirts made in carbon this winter and have them on for Sema.

[syborg tt]

Originally Posted by Rick D

Um me likey! So where did you get those??

If you want I can bring them home so you can see them before I ship them to Kenny's. Or maybe I will bring them to your house when I come to see the Camaro.

[Rick D]

Originally Posted by syborg tt

If you want I can bring them home so you can see them before I ship them to Kenny's. Or maybe I will bring them to your house when I come to see the Camaro.

Either way but yes I would like to check them out