2nd Chance Camaro - Let the Project Begin

[protour73]

Originally Posted by syborg tt

Now on a side note: I received an email from a gentlemen and he warned me that the Moser ends are designed for only straight line use and could fail. Anyone have any thoughts on this ????

Mind you this car is actually being build to be driven with very limited auto-cross.

This quite disturbing as I included the c-clip eliminators to my Moser rear end when I ordered it directly from Moser and told them the car was primarily for street use but occasional track use. The guy NEVER said no, this won't work for you!!

From Moser website in the FAQ section:

Can I use c-clip eliminators for street use?

Answer - We do NOT recommend using C-Clip Eliminators for street use; a C-Clip Eliminator is made for drag race only ( As a safety issue so you do not loose an axle, if it breaks ).C-Clip Eliminators are made for the straight shot down the strip. If you use C-Clip Eliminators on the street the aluminum block will eventually flex from cornering or just going around curves causing the C-Clip Eliminator to leak Rearend fluid.

[Rick D]

Originally Posted by protour73

This quite disturbing as I included the c-clip eliminators to my Moser rear end when I ordered it directly from Moser and told them the car was primarily for street use but occasional track use. The guy NEVER said no, this won't work for you!!

From Moser website in the FAQ section:

Scott I think if I remember correctly don't you have the Ford Big bearing ends on your housing?? If so then you shouldn't have any issues?

[protour73]

Originally Posted by Rick D

Scott I think if I remember correctly don't you have the Ford Big bearing ends on your housing?? If so then you shouldn't have any issues?

Yes I do

(sorry for the hijack Marty!! LOL)

[glassman]

I was told the same thing by the tech who did my 12 bolt, he said do a "nine inch", 3k or rebuild my 12 bolt for 900, i am warned about pad knock....we'll see...

So are the Strange Eng ones any different? i couldnt quite follow what was meant a few posts back...me need to research more...

Any more progress pics Marty?

Is it going to SEMA? if so where?

U got any trails in mind if you go for a weekend trail juant....?

[syborg tt]

Originally Posted by glassman

I was told the same thing by the tech who did my 12 bolt, he said do a "nine inch", 3k or rebuild my 12 bolt for 900, i am warned about pad knock....we'll see...

So are the Strange Eng ones any different? i couldnt quite follow what was meant a few posts back...me need to research more...

I will be calling Moser this afternoon to get confirmation.

Any more progress pics Marty?

Yep, Plenty I am going to try to get a couple more out today

Is it going to SEMA? if so where?

Yes and I have two booths that I would love to be in but only time will tell

U got any trails in mind if you go for a weekend trail juant....?

last year bunch of guys told me about a pretty cool trail network near the Optima Challenge but I can't remember the name.