Which Forgeline is this? - Lateral-g Forums

**Forgeline Wheel** · #1 10-13-2013, 11:30 PM

Yep that is the ZX3.

FYI, the GZ3 is the updated version of the ZX3 that employs the new I-beam spoke design to add strength and reduce weight. We still sell a lot of ZX3s, but if you like this wheel and want the latest engineering and manufacturing tech, then consider the GZ3 too. http://www.forgeline.com/products/pe...-18-19-20.html

Also FYI, if it were missing a center cap and had a deeper center area around the lug holes, then it would be the ZX3R.

And if it were a flat lip outer and the spokes connected to the rim register from the inside of the radius (versus connected to the front of the rim register), then it would be the ZX3P.

Rick D · #2 10-14-2013, 05:59 AM

Quote:

Originally Posted by Forgeline Wheel

Also FYI, if it were missing a center cap and had a deeper center area around the lug holes, then it would be the ZX3R.

]

Oh man those are nice looking wheels!!! I want a set for my 2nd gen

hummmm so Mark what would a set of 18x9 and 18x10 cost???

**glassman** · #3 10-14-2013, 08:42 PM

Yes they are beautiful. This is the set i'm leaning towards. Brushed center, no exoposed screws, polished outer lip. I will be at SEMA on tuesday and will see ya there....thanx,Mike

**Forgeline Wheel** · #4 10-14-2013, 11:58 PM

Quote:

Originally Posted by glassman

Yes they are beautiful. This is the set i'm leaning towards. Brushed center, no exoposed screws, polished outer lip. I will be at SEMA on tuesday and will see ya there....thanx,Mike

Mike, not a problem. Sounds great! But which wheel are you referring to?
FYI, I don't fly out until Tuesday morning and am not sure what time I'll make it to the booth. So please be prepared to talk to Steve and/or Dave too. Thanks!

**Forgeline Wheel** · #5 10-16-2013, 08:00 AM

Quote:

Originally Posted by Rick D

so Mark what would a set of 18x9 and 18x10 cost???

PM sent. Thanks Rick!

ProPont · #6 10-16-2013, 11:09 AM

I am ready to order my set of Forgeline ZX3's, Mark I will be at Sema on Wednesday and if its alright I will stop by to discuss.

**Forgeline Wheel** · #7 10-16-2013, 11:23 AM

Quote:

Originally Posted by ProPont

I am ready to order my set of Forgeline ZX3's, Mark I will be at Sema on Wednesday and if its alright I will stop by to discuss.

Yep that sounds great, Scott! Do you have a guess what time window you might want to talk on Wednesday? (I'll try not to wander too far away.)

protour73 · #8 10-16-2013, 05:22 PM

Quote:

Originally Posted by ProPont

I am ready to order my set of Forgeline ZX3's, Mark I will be at Sema on Wednesday and if its alright I will stop by to discuss.

HA......another Plainfield guy!! Can't wait to see your car finished as I'm in Plainfield as well.

Are you building it yourself?

ProPont · #9 10-16-2013, 08:31 PM

Mark, please don't wait around for me. I am not sure what time I will be able to get there. I am going with a few other car guys. Do you have a best time frame that you will be there for awhile?

ProPont · #10 10-16-2013, 08:41 PM

Yes i am building it myself. I can't wait to see it finished someday. X-mas coming early this year. Dse subframe and roll cage coming this week.