1969 Torino

[INTMD8]

Originally Posted by FETorino

It will eventually be welded back in now that the motor and transmission has been moved back 7.5".

How is engine placement in relation to front wheel centerline now?

[FETorino]

Originally Posted by INTMD8

How is engine placement in relation to front wheel centerline now?

This gives you a good idea. The balancer is behind the rack and the front of the block is at or just behind the front axle.

[Ron in SoCal]

Originally Posted by FETorino

This gives you a good idea. The balancer is behind the rack and the front of the block is at or just behind the front axle.

You have front axles? Man I gotta get over to the shop and see this!

[intocarss]

I thought you were running dual quads??

[FETorino]

Originally Posted by Ron in SoCal

You have front axles? Man I gotta get over to the shop and see this!

OK fact checker you know what I mean.

It's like referring to the KPI, King Pin Inclination of your spindle when you don't have a Kingpin.

You can still find reference to portions of a spindle as an axle

Originally Posted by intocarss

I thought you were running dual quads??

JerDog. Eventually.

I ran both setups on the dyno. My 701hp on E85 was made with a single 4150.

Back to back on Gas the first weekend on the dyno we got close to 25hp more with the dual quad over a single Dominator and about 35hp more than the single 4150. I don't own, or have access to a pair to borrow, of properly set up dual E85 carbs so I don't know what the E85 single vs dual quad hp difference would be. I'm sure the duals would also make more hp on E85. The intake is just a better overall design.

One day when the bleeding of $$ slows I'll build a matched set of E85s for the dual quad and it will go on the car. Just for the cool factor if nothing else. For now I'm just running my single 4150.

[intocarss]

Originally Posted by FETorino

OK fact checker you know what I mean.

It's like referring to the KPI, King Pin Inclination of your spindle when you don't have a Kingpin.

You can still find reference to portions of a spindle as an axle





JerDog. Eventually.

I ran both setups on the dyno. My 701hp on E85 was made with a single 4150.

Back to back on Gas the first weekend on the dyno we got close to 25hp more with the dual quad over a single Dominator and about 35hp more than the single 4150. I don't own, or have access to a pair to borrow, of properly set up dual E85 carbs so I don't know what the E85 single vs dual quad hp difference would be. I'm sure the duals would also make more hp on E85. The intake is just a better overall design.

One day when the bleeding of $$ slows I'll build a matched set of E85s for the dual quad and it will go on the car. Just for the cool factor if nothing else. For now I'm just running my single 4150.

REAL MEN TUNE WITH A SCREWDRIVER,,,, NOT A LAPTOP

[INTMD8]

Originally Posted by intocarss

REAL MEN TUNE WITH A SCREWDRIVER,,,,

Yep, they also hunted mastadon. AKA cave men.

[GrabberGT]

Im asking Santa for new valve covers. What kind are those? Maybe I'll get lucky and he can deliver them with a motor attached.

[Flash68]

I thought we agreed no more pics of that scary gimp holding cell

Run the duals. You know you want to.

[FETorino]

Originally Posted by Flash68

I thought we agreed no more pics of that scary gimp holding cell

Run the duals. You know you want to.

We agreed to NOTHING

Of course I want to run the duals. Other than an EFI weenie who wouldn't