Motor I'm going to use? The 3k mile dry sump LS3 I bought off of Racing Junk for $4500 now with Mahle pistons and Manley rods thanks to a cam not fitting. Just keep throwing Benjamin's at it and all your troubles will go away. Now trying to decide if I want GMPP ECM set up, FAST or Holley.......need more Benjamin's!
Time to sell my reliable Lateral G machine the C6 Z06, maybe I should use proceeds to buy back my X33 69 RS Xram JL-8 Z....how would this go over with my wife......for 1st 10 years of marriage that car had prized parking spot in garage while her ride was outside.....note to self need more shop space!
In the future this poll would have changed SBC to "gasoline engine" or maybe "internal combustion engine".... HeHe.. And the others would be "lipo" "AA" "Parallel wired 9volt" "Duracell" or whatever is hot in the Electric world now..
There is a lot of Electric cars here in my country now....
I have a Pontiac With a Pontiac in it, Round port exhaust Alu heads and Roller Cam. A Holley on the top too
Mopar Aluminum Gen III Hemi block bored and stroked to 440 inches (4.140x4.080), 9.5:1 compression, Ported 6.4L Apache Heads, Ported 6.1L Intake Manifold and a pair of Precision Turbo 6266 Turbos. Back it up with a built A580 5 speed auto trans from the SRT cars. Plan is to run about 12psi on pump gas and 18-20 on Q16. Should be around 800rwhp on pump and 1150-1200RWHP on Race gas. Plan is to be mostly a pump gas street car but I may run it in the Modern Street Hemi Shootout series from time to time just for giggles.
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
I must be alone in here with my SBF
And the others would be "lipo" "AA" "Parallel wired 9volt" "Duracell" or whatever is hot in the Electric world now.. 
Hybrid Mode
