Installing & Cleaning Your FORMULA 43 Wheels

[HMA]

Travis,

I know you are a fan of the McGard lug nuts. For open end lug nuts what is your expierence/ what do you think of the monster lugs?

For polishing the aluminum hoops what polish do you recommend and do you polish them a certain direction. Thanks

Evan

[Formula43 Wheel]

Hello Evan, I was just about to give you a shout out as I'm heading your way on the 22nd of this month. I would love to see and go for a ride in your Camaro, dinner is on me!

I prefer a closed style lug nut over open style as the closed style keeps any moisture, debri, etc. out of the contact area (thread & stud). I also cannot recommend using anti seize as this can cause for an inaccurate torque reading and possibly cause the nut to loosen. If you're actively tracking/racing your car then your studs and nuts will wear must faster and should be inspected or replace after X amount of time. This is why using a good high quality lugnut and stud combo like , McGard, ARP or MSI are important. Most studs will have a corrosion resistant coating. I've found the studs that do not have any coating on them are made overseas with lower quality metals and strip, break, corrode easily.

For open lugnuts I would recommend MSI. Very high quality, but only available in black.

Thanks and hopefully see you soon!

[HMA]

Absolutely Travis, if you are around Monday I can get you in to our simulator and let you play a bit. Give me a call this week and we'll get something going.

-Evan

[Formula43 Wheel]

On the Monster lug nuts they look nice but will hang out past the wheel center lug pocket area which might not be appealing to some due to the length.

Benefits of McGard nuts are:

http://www.mcgard.com/index.php/auto...-nutslug-bolts

Also, the bulge style cone seat lugnut has more surface contact area than the standard 13/16" hex nuts. The 3/4"/19mm hex give you more room to get the socket in the lug pocket without nicking the lug pocket surface.

I prefer to hand thread them on rather than using a impact.

[Formula43 Wheel]

The last item that hasn't come up for quite some time is locking lug nuts. They work fine until you lose the key to get them off.

Normally you don't realize you've lost this special socket key until you really need the wheel and tire off.

Here in Detroit, it's allot of work to jack up the car and remove/steal the wheels. It's much easier to steal the whole car.

[latoracing]

Originally Posted by HMA

Travis,

I know you are a fan of the McGard lug nuts. For open end lug nuts what is your expierence/ what do you think of the monster lugs?

For polishing the aluminum hoops what polish do you recommend and do you polish them a certain direction. Thanks

Evan

I bought Monster lug nuts for my RAD 14 wheel set up. I am running 3" long wheel studs and needed an open ended nut. They look to be a quality part, and they have a longer body to help get them on and off the studs. A standard open ended nut would be way down inside of the pocket. I haven't mocked my wheels up on the suspension as of yet, but here is an example of what they would look like. I took this when we were checking hub fitment before final finishing.

[HMA]

Originally Posted by latoracing

I bought Monster lug nuts for my RAD 14 wheel set up. I am running 3" long wheel studs and needed an open ended nut. They look to be a quality part, and they have a longer body to help get them on and off the studs. A standard open ended nut would be way down inside of the pocket. I haven't mocked my wheels up on the suspension as of yet, but here is an example of what they would look like. I took this when we were checking hub fitment before final finishing.

That is a great looking wheel. You will absolutely love them. Here is a picture of my RAD10s with black monster lugs. I have 3 inch studs as well so I needed the open end lugs. Just curious what everyone else is running.

-Evan

[Formula43 Wheel]

They look great on both guys! Thank your for posting pics.

Now if you really want to get light weight then we can go with titanium lug nuts! Cha Ching ! $$$$

[Bryan O]

I'm looking forward to the "installation" part of your instructions. Should be soon.

[Formula43 Wheel]

Originally Posted by Bryan O

I'm looking forward to the "installation" part of your instructions. Should be soon.

Yes, can't wait to see photos of your finished car with the new wheels and tires!