Newbie Here!!

[Rick D]

Originally Posted by streetbird

Vert Nice tank. How much they sell it?

Not sure with cut corners but here's the FI version, seems to be priced well?

http://www.tanksinc.com/index.cfm/pa...rod/prd347.htm

[Rod P]

Originally Posted by Rick D

Not sure with cut corners but here's the FI version, seems to be priced well?

http://www.tanksinc.com/index.cfm/pa...rod/prd347.htm

this is BRAND NEW!!! this is tank one and the straps are so new Tanks inc E-mailed me to make sure they fit, great folks making great parts, it was prototyped to fit on a mini tubed car with 335 tires and 3 inch over the axle exhaust

[GrabberGT]

Originally Posted by Rod P

this is BRAND NEW!!! this is tank one and the straps are so new Tanks inc E-mailed me to make sure they fit, great folks making great parts, it was prototyped to fit on a mini tubed car with 335 tires and 3 inch over the axle exhaust

Uh-oh... You going fatter in the rear? What else have you got planned for the trip?

[Rod P]

Originally Posted by GrabberGT

Uh-oh... You going fatter in the rear? What else have you got planned for the trip?

ha ha ha ha.....not for Optima, next season I will have larger wheels, Kyle over at DSE said he would help me out when I'm ready HUGE plans for Jane next season so we well see

[Vince@Meanstreets]

Originally Posted by Rod P

this is BRAND NEW!!! this is tank one and the straps are so new Tanks inc E-mailed me to make sure they fit, great folks making great parts, it was prototyped to fit on a mini tubed car with 335 tires and 3 inch over the axle exhaust

Part number ROD315X4? LOL

did they list a part number....I have a need for one soon.

Looking good rod.

Save some for the safety equipment too.

[Vince@Meanstreets]

Originally Posted by Rod P

this is BRAND NEW!!! this is tank one and the straps are so new Tanks inc E-mailed me to make sure they fit, great folks making great parts, it was prototyped to fit on a mini tubed car with 335 tires and 3 inch over the axle exhaust

maybe if one revision could be made...instead of that nipple in the center, ask if they can weld in a 1/4" NPT bung on the flat side of the tank. Oh and real baffles.

[Rod P]

Originally Posted by Vince@MSperfab

maybe if one revision could be made...instead of that nipple in the center, ask if they can weld in a 1/4" NPT bung on the flat side of the tank. Oh and real baffles.

the nipple is for the tank vent, they supply one with the kit you just add hose and locate the tank vent (as you know) above the full tank level

[Vince@Meanstreets]

Originally Posted by Rod P

the nipple is for the tank vent, they supply one with the kit you just add hose and locate the tank vent (as you know) above the full tank level

I have their tank for that Chevelle and there's a perfect spot (above the fuel level) on the front side.

I just hate to drill it and weld in a bung. It's so pretty.

[Bad94]

Originally Posted by Rod P

the nipple is for the tank vent, they supply one with the kit you just add hose and locate the tank vent (as you know) above the full tank level

Need to talk to you about my fuel vent can, simple and flat out works. Call me on Monday.

[Rod P]

Originally Posted by Bad94

Need to talk to you about my fuel vent can, simple and flat out works. Call me on Monday.

you gonna charge me extra because you were on TV? freaking TV stars