help with stainless lines

[bentfab]

Originally Posted by snappytravis

Pure choice motorsports is where I order my stainless line from. Very knowledgable guys. I also ordered a hydraulic flaring tool. It is the only way to go. Go to harbor freight and buy the little blue tubing bender. It's the best cheap tool ever.

http://www.powertoolsonline.net/Prod.../DSD102432.jpg

The problem with that tool is it dosnt allow you to get a tight 90 at the end of a bend because the dies are to long. Buy the time you put a nut and sleeve or flare nut on the end of the tube. There will be at least 1" or more of tubing from the start of the bend to the flare seat.

I use Pure choice a lot. They have quite a few cool products.

Mark