Brembo GT 6 piston fr / 4 piston rr monoblock brake kit FS

[Ron in SoCal]

Originally Posted by payne

Ron-

I'm interested. Toasted my 12.19" Wilwoods at Thunderhill, so the 14" rotor is appealing.

What would I need to run these on my 69? Stock front spindles and a 12 bolt with C-clip eliminators. Is this just the calipers, rotors and lines, or are there brackets as well?

Thanks,
Jason

Hey Jason,

They come with radial mount brackets front and rear. These bolt up to c5 / c6 spindles so you'd need Tobin's magic brackets in the front. Piece of cake. Rears I cannot comment with certainty, but again it's made for a Corvette so I'd bet Tobin has something.

Give me a call and I'll work through it for you

Ron

[MillerBuilt]

Originally Posted by Ron in SoCal

Hey Jason,

They come with radial mount brackets front and rear. These bolt up to c5 / c6 spindles so you'd need Tobin's magic brackets in the front. Piece of cake. Rears I cannot comment with certainty, but again it's made for a Corvette so I'd bet Tobin has something.

Give me a call and I'll work through it for you

Ron

Hi Ron,

I have weld on caliper brackets that will get these rear calipers mounted to ANY housing with a 3" axle tube. Most likely you will need a different hat with a deeper offset though. Hope this helps.

Jay

[Ron in SoCal]

Thanks Jay!