Roadster Shop REVO C10 build - Lateral-g Forums

**tones2SS** · #1 02-19-2015, 07:15 PM

The front and rear end both are works of art. Great stuff.
Look at those welds!

Roadster Shop · #2 02-20-2015, 12:18 PM

The rear suspension installed for initial test fitting and mock up

Roadster Shop · #3 02-20-2015, 12:19 PM

And the front installed

Getting the steering linkage to the rack has always been an issue on these trucks due to the frame rail width and positioning of the steering column coming through the firewall. We have designed a package to take the guesswork out of routing the steering. We fabbed up a chassis brace that bolts into the frame rail. A small notch is required to be cut in the frame to get a better steering shaft angle. The new frame mount includes a tab for a heim joint to support the steering shaft. We have also designed a lower column mount (through firewall) and an upper column mount (to the dash) to secure the column adn position it where it needs to be. This is designed to work with an Ididit replacement column

Roadster Shop · #4 02-20-2015, 04:38 PM

A few teaser shots for the weekend!

Roadster Shop · #5 02-25-2015, 05:25 PM

A few completed shots...

**tones2SS** · #6 02-25-2015, 06:49 PM

One word = AWESOME!

**extralight** · #7 02-25-2015, 07:35 PM

Very well designed and quite affordable when you think of the minimum install time for the performance and looks you get.....well done Roadster Shop!