...

Go Back   Lateral-g Forums > Lateral-G Open Discussions > Project Updates
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 11-11-2015, 11:37 AM
LS7 Z/28 LS7 Z/28 is offline
Senior Member
 
Join Date: Oct 2013
Posts: 453
Thanks: 0
Thanked 10 Times in 5 Posts
Default

Hey Mark, I tried sending you a PM a while back but your inbox was full. Do you have a part number for the Air filter you like to use on your current setup? I saw a recent photo when you were finishing things up on this for the good guys show. It looks like a huge filter, is it sourced from a GM vehicle? I had a discussion with Brian Thomson about this but he wasn't sure about where you're getting the filter from. Thank you for any information you might be able to provide. The Airraid filter I bought was starving my engine on the chassis dyno.

Thanks
Reply With Quote
  #2  
Old 11-11-2015, 11:54 AM
Stielow's Avatar
Stielow Stielow is offline
Lateral-g Supporting Member
 
Join Date: Dec 2004
Posts: 2,526
Thanks: 29
Thanked 2,309 Times in 623 Posts
Default

Quote:
Originally Posted by LS7 Z/28 View Post
Hey Mark, I tried sending you a PM a while back but your inbox was full. Do you have a part number for the Air filter you like to use on your current setup? I saw a recent photo when you were finishing things up on this for the good guys show. It looks like a huge filter, is it sourced from a GM vehicle? I had a discussion with Brian Thomson about this but he wasn't sure about where you're getting the filter from. Thank you for any information you might be able to provide. The Airraid filter I bought was starving my engine on the chassis dyno.

Thanks
It is a 6 inch inlet K&N. I made an adaptor to neck it down to 5 inches. Matt at Sled Alley made the inlet tube that tapers fron 5 inches down to 4 inches at the 90 mm TB.

I hope that helps. I can try to finf the part number but it was the biggest one I could fit in the fender.

BTW my engine is flowing around 1600 CFM so a big filter is part of the package.

Mark
Reply With Quote
  #3  
Old 11-11-2015, 12:42 PM
LS7 Z/28 LS7 Z/28 is offline
Senior Member
 
Join Date: Oct 2013
Posts: 453
Thanks: 0
Thanked 10 Times in 5 Posts
Default

Quote:
Originally Posted by Stielow View Post
It is a 6 inch inlet K&N. I made an adaptor to neck it down to 5 inches. Matt at Sled Alley made the inlet tube that tapers fron 5 inches down to 4 inches at the 90 mm TB.

I hope that helps. I can try to finf the part number but it was the biggest one I could fit in the fender.

BTW my engine is flowing around 1600 CFM so a big filter is part of the package.

Mark
Thanks Mark, that is great info. Your engine is certainly an anomaly!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 12:04 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net