coilovers confusion

[Blake Foster]

should be no issue up front
you will need a 1/2 id bearing that is 1.25 wide for the upper mount, for the lower if the shock is available with a 5/8 x 5/8" bearing then we can get you a T Bar for the lower if DSE doesn't have them available.
The front shock length will be 10" compressed 14 extended or there about.

[TheJDMan]

AFCO sells a shock mount crossbar kit PN 20147-2 which includes a 1.060" OD x 5/8" ID bearing, crossbar and C-Clips for $30ea which will work with DSE shocks. DSE shocks use an industry standard 1.060" OD mount bearing so you just press the old bearing out and press the new bearing in.

http://www.summitracing.com/parts/afc-20147-2