Gray86hatch

[gray86hatch]

[Spiffav8]

Tim,

Love that Z28 man! All the cars are super nice. Great attention to detail and so well maintained. Nice!!

Welcome to !!

[gray86hatch]

Thanks

Going to try and get springs and shocks on the car before fall then do the wheel and brakes. I should be able to get to a couple events next year with it

Tim

[89 RS]

I'll second the Z28, very cool ride. The others are also pretty cool, that LS motor in the Mustang is pretty sweet.

[gray86hatch]

I have been looking at wheels and think I am going to go with black z06 17 and 18. C5 brakes from kore3 red calipers. DSE springs and koni shocks.
Deff doing DSE subframe connectors and sway bar.

Like to pick up a 5.3 with a 4l60e. Priced out the vintage air. Holley has some new alt and ps brackets coming out that should allow a truck alt with a car ps pump clear the steering stuff . Deff like cheaper than vette front dress

[89 RS]

Originally Posted by gray86hatch

I have been looking at wheels and think I am going to go with black z06 17 and 18. C5 brakes from kore3 red calipers. DSE springs and koni shocks.
Deff doing DSE subframe connectors and sway bar.

Like to pick up a 5.3 with a 4l60e. Priced out the vintage air. Holley has some new alt and ps brackets coming out that should allow a truck alt with a car ps pump clear the steering stuff . Deff like cheaper than vette front dress

Sounds like some good stuff. Keep us posted.

[gray86hatch]

I got the Pypes exhaust on last week. It is super super quite. This is the kit with the transvers muffler.

I wanted max ground clearance and to be able to drive for hours so it needed to be quitet. I would say in sounds like a stock 2000's f body.

Also installed rear Koni classic shocks. These made a big difference going to try and get front ones for it this week.

Tim

[gray86hatch]

It has been a long time since I updated this but here is where we are at.
Bonspeed GT-B
DSE front and rear suspension.
C6 Z51 brakes

[gray86hatch]

I have collection of parts for the car in the shop.
07 5.3 alum block 799 heads ls2 intake and cam
Complete hooker headers exhaust
Holley EFI off the mustang
3650 5 speed
Hyd clutch conversion

I am going to get the car torn down next month and start on the clean up and smoothing of everything

Tim

[gray86hatch]

Also have the Holley accessory brackets set up for f body spacing